One-year trial evaluating the durability and antimicrobial efficacy of copper in public transportation systems.

Surfaces on transit vehicles are frequently touched and could potentially act as reservoirs for micro-organism transmission. Regular cleaning and disinfection to minimize the spread of micro-organisms is operationally challenging due to the need to keep vehicles in circulation. The application of copper (Cu) alloys to high- touch surfaces could help reduce the risk of cross-contamination, however, little is known about the durability and efficacy of engineered copper surfaces after prolonged use. Three Cu products (decal, thermal fabrication, and alloy covers) were assessed over a 12-month period. These Cu products were randomly installed on 110 stanchions on three buses and four train (SkyTrain) cars in Vancouver and three buses, two subway cars, and two streetcars in Toronto with mirrored control surfaces directly opposite. Bacterial counts (Colony forming units, CFU) and ATP bioluminescence (ATPB) were measured every two months after peak morning routes. Durability of the Cu products were assessed monthly through visual inspection and colorimetry assays or by ex-situ microscopy. Cu products on stanchions reduced the mean colony forming units (CFU) of all vehicles by 42.7% in the mean CFU (0.573 (CI 95% 0.453-0.726), p-value < 0.001) compared to control surfaces. The three Cu products exhibited an overall 87.1% reduction in the mean ATPB readings (0.129 (CI 95% 0.059-0.285, p-value < 0.001) compared to controls. Surface Cu concentration for all three products was consistent throughout the 12-month period. Electron microscopy (SEM) and Energy-dispersive X-ray Spectroscopy (EDS) cross-sectional analysis showed no change in thickness or dealloying of Cu products, however SEM top-down analysis revealed substantial carbon accumulation on all surfaces. Cu products installed on transit vehicles maintained antimicrobial efficacy and durability after 12 months of use.

Myelin heterogeneity for assessing normal appearing white matter myelin damage in multiple sclerosis.

BACKGROUND AND PURPOSE: Conventional MRI measures of multiple sclerosis (MS) disease severity, such as lesion volume and brain atrophy, do not provide information about microstructural tissue changes, which may be driving physical and cognitive progression. Myelin damage in normal-appearing white matter (NAWM) is likely an important contributor to MS disability. Myelin water fraction (MWF) provides quantitative measurements of myelin. Mean MWF reflects average myelin content, while MWF standard deviation (SD) describes variation in myelin within regions. The myelin heterogeneity index (MHI = SD/mean MWF) is a composite metric of myelin content and myelin variability. We investigated how mean MWF, SD, and MHI compare in differentiating MS from controls and their associations with physical and cognitive disability. METHODS: Myelin water imaging data were acquired from 91 MS participants and 31 healthy controls (HC). Segmented whole-brain NAWM and corpus callosum (CC) NAWM, mean MWF, SD, and MHI were compared between groups. Associations of mean MWF, SD, and MHI with Expanded Disability Status Scale and Symbol Digit Modalities Test were assessed. RESULTS: NAWM and CC MHI had the highest area under the curve: .78 (95% confidence interval [CI]: .69, .86) and .84 (95% CI: .76, .91), respectively, distinguishing MS from HC. CONCLUSIONS: Mean MWF, SD, and MHI provide complementary information when assessing regional and global NAWM abnormalities in MS and associations with clinical outcome measures. Examining all three metrics (mean MWF, SD, and MHI) enables a more detailed interpretation of results, depending on whether regions of interest include areas that are more heterogeneous, earlier in the demyelination process, or uniformly injured.

Implementing genomics in the neonatal period: An assessment of parental decision making and anxiety.

As uptake of rapid genome sequencing (GS) in the neonatal period steadily increases, a clinical genetics service that is optimized to the needs of parents becomes increasingly important. We aimed to investigate factors that influence decision making about rapid GS by parents of infants admitted to neonatal intensive care units (NICU) and explore their experiences of decisional conflict and anxiety during this time. Parents of neonates suspected of having a genetic disorder and offered rapid GS in the NICU completed a questionnaire measuring experience with GS counseling, decisional conflict, and anxiety level. Our results demonstrate that despite a largely positive GS experience (70%; 21/30) among the survey respondents, 50.0% (14/28) experienced moderate to severe anxiety measured using the GAD-7 scale, and 34.6% (9/26) experienced decisional conflict measured using the SURE scale. We also showed that prematurity may be a modifier of anxiety in this group of parents and although not statistically significant, distance lived away from the hospital site could have practical significance. Open-ended responses to survey questions highlighted that feeling overwhelmed, the types of engagements parents had with healthcare providers, and the timing of information provision also influenced parental decision making in this setting. We suggest that the GAD-7 scale for generalized anxiety and SURE scale for decisional conflict could be incorporated by genetic counselors into routine care of parents of neonates who have been offered rapid GS to identify those who may need additional support (resources, information, or psychological). These tools may inform ways that communication between patients and providers can be improved and enhanced and clinical genetics services in the NICU can be optimized. We suggest that integrating genetic counselors into the NICU care team could increase access for this population and ensure delivery of optimized patient education and counseling.

Dimensional Changes of Yttria-stabilized Zirconia under Different Preparation Designs and Sintering Protocols.

PURPOSE: To evaluate the linear and volumetric dimensional changes that occur throughout the fabrication process of monolithic 4.5-6% yttria-stabilized zirconia copings under the influence of different preparation designs and two sintering protocols. MATERIALS AND METHODS: A titanium master die was fabricated using Atlantis core file implant-abutment. Six copings were designed virtually according to different finish line offsets and coping thicknesses, with four equidistant occlusal posts for linear measurements. Zirconia copings were milled using IPS e.max ZirCAD LT zirconia blanks. The experimental groups according to the coping designs were the following: G1: 0.5 mm finish line offset, 0.5 mm thickness; G2: 0.5 mm finish line offset, 1.0 mm thickness; G3: 0.5 mm finish line offset, 1.5 mm thickness; G4: 1.2 mm finish line offset, 0.5 mm thickness; G5: 1.2 mm finish line offset, 1.0 mm thickness; G6: 1.2 mm finish line offset, 1.5 mm thickness. Six samples per group were sintered by standard sintering (SS) and the other six by fast sintering (FS). Linear and volumetric measurements were taken at the three fabrication stages (virtual design, milling stage, and sintering) by using an intraoral scanner and imported as the .stl file to Meshmixer software for analysis. Statistical analysis was performed by a linear mixed effect model via statistical software R (R Core team, 2018). RESULTS: There was a significant interaction between the coping design group, stage of fabrication and sintering protocol on the linear (F = 4.451, p < 0.001) and volumetric (F = 2.716; p < 0.001) dimensional changes. Standard sintering G1 showed the smallest linear and dimensional changes among the groups compared to the reference design. Sintered copings had shrunk on average 1.32% within SS and 1.54% within FS linearly and 3.82% within SS and 3.90% within FS volumetrically compared to the initial design parameters. CONCLUSION: The linear and volumetric dimensional changes did not differ significantly between standard and fast sintering protocols, and the preparation designs had more influence on the dimensional changes compared to sintering protocols.